Hitec RDX2 Pro 260W 6 Cell (6S) Dual Port LiPo AC/DC Charger

RDX2 Pro 260W 6 Cell (6S) Dual Port LiPo AC/DC Charger from Hitec – HRC44301

Hitec’s popular RDX charger line continues to expand with the introduction of the RDX2 Pro, a dual port AC/DC charger providing a whopping 260 watts of power! The RDX2 Pro features independent, 130-watt circuits, allowing you to charge two packs simultaneously. Its user-friendly Jog Dial easily scrolls through menus, making programming a breeze. Capable of charging 2S packs at rates up to 14 amps, and 4S packs up to 9 amps, the RDX2 Pro’s robust charge rates provide more power in less time for your 1/8th and 1/10th-scale Buggy and Truggy needs.

Pilots flying larger aircraft and helis using high capacity 4S-6S packs can also rely on the RDX2 Pro to rapidly charge 4S and 6S packs up at to 9 and 5.8 amps, respectively. And with just a few clicks, the RDX2 Pro will also convert into a power supply unit to power your other hobby equipment. The dual channel design can power two individual 5 – 24 volt devices simultaneously.

High power charging at faster rates* will get you back in the action sooner than ever.

*(not all Lithium batteries can be safely charged above 1C. Always follow your battery’s manufacturer guidelines to prevent accidents or injury.)

Designed exclusively to pair with our Hitec Bluetooth® Dongle to control and monitor the RDX2 Pro charger using your smartphone via the app.

Note: We recommend reading this Motion RC knowledge blog article about charger amperage and wattage ratings.

Features:

• User-Friendly Jog Dial for Easy Scrolling and Programming
• Stores 10 Different Battery Memory Charge/Discharge Profiles
• Balance, Standard, Fast and Storage Modes for All Lithium Battery Chemistries
• Internal Independent Lithium Battery Balancer
• Independent Cell Balancing While Discharging
• Terminal Voltage Control
• Re-Peak Charge Mode and Delta-Peak Sensitivity for NiMH/NiCd Batteries
• Capacity Cut-Off Limit
• Smart Ventilation Fan
• 5V/2.1A USB port
• Micro USB Socket for Optional Bluetooth® Dongle, PC Interface, and Firmware Upgrades
• Power Supply Function

Includes:

• Hitec RDX2 Pro 260W 6 Cell (6S) Dual Port LiPo AC/DC Charger
• AC Power Cord
• DC Cable with Clips
• 2x XT60 to T-Type Adapter
• Universal Balance Board
• Balance Board Lead
• XT60 to RX Battery Adapter